MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854
Section 196
Cite as MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854, s. 196 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026
The text
(1) No person shall ride on a conveyor belt. R.R.O. 1990, Reg. 854, s. 196 (1).
(2) A conveyor shall have,
(a) a means to safely apply belt dressing while the conveyor is in motion; and
(b) if the conveyor is started automatically, by remote control or if a portion or portions of the conveyor are not visible from the operator’s position, a start-up warning device. O. Reg. 167/16, s. 12 (1); O. Reg. 61/18, s. 6 (1).
(3) Subsections (3.1) and (3.2) apply to the following pinch points on a conveyor:
1. The head, tail, drive, deflection and tension pulleys.
2. If the lift of the belt is restricted, the return rollers and the carry rollers. O. Reg. 167/16, s. 12 (1).
(3.1) Subject to subsection (3.2), the pinch points referred to in subsection (3) shall be guarded by a guard that, unless it would render the pinch point inaccessible, extends at least 0.9 metres from the pinch point. O. Reg. 167/16, s. 12 (1).
(3.2) If it is impracticable to comply with subsection (3.1),
(a) a fence shall be in place that prevents access to the pinch points;
(b) a barricade shall be in place that prevents access to the pinch points; or
(c) a gate equipped with an interlocking device, which has a manual reset switch, shall be in place that prevents access to the pinch points while the conveyor is operating. O. Reg. 167/16, s. 12 (1).
(3.3) Subsections (3.1) and (3.2) do not apply if the position or construction of the conveyor provides equivalent protection that renders the pinch points inaccessible. O. Reg. 167/16, s. 12 (1).
(4) Guards shall be provided beneath a conveyor,
(a) that passes over a worker; or
(b) from which falling materials or parts may endanger a worker. R.R.O. 1990, Reg. 854, s. 196 (4).
(5) A conveyor in an underground mine shall have,
(a) devices that guard against excessive slip between the belt and the driving pulley; and
(b) a fire suppression system at the driven end unless fire retardant belting is used or the conveyor is continually attended by a worker. R.R.O. 1990, Reg. 854, s. 196 (5); O. Reg. 61/18, s. 6 (2).
(6) A conveyor shall be stopped and the prime mover de-energized, locked and tagged out when the conveyor is undergoing repairs, adjustments or maintenance unless,
(a) it is necessary to run the conveyor during such work; and
(b) effective precautions are taken to prevent injury to a worker from moving parts. R.R.O. 1990, Reg. 854, s. 196 (6); O. Reg. 167/16, s. 12 (2).
Read the MINES AND MINING PLANTS on e-Laws ↗
Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.