MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854

Section 193

Cite as MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854, s. 193 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026

The text

(1) A grinder shall be assembled and adjusted in accordance with the manufacturer’s specifications. R.R.O. 1990, Reg. 854, s. 193 (1). (2) The maximum speed at which a grinding wheel may be operated shall be indicated on the grinding wheel or in a manner by which the speed may be readily ascertained. R.R.O. 1990, Reg. 854, s. 193 (2). (3) A grinding wheel shall be, (a) enclosed by a protective hood except for the area at the workrest; (b) stored where it will not be damaged by impact, extreme heat and cold; (c) stopped when the grinder or workrest is being adjusted; and (d) not operated in excess of the manufacturer’s recommended maximum speed. R.R.O. 1990, Reg. 854, s. 193 (3). (4) The operator of a grinder shall wear eye protection. R.R.O. 1990, Reg. 854, s. 193 (4). (5) The workrest of a grinder shall be mounted above the centre line of the grinding wheel not more than three millimetres from the wheel. R.R.O. 1990, Reg. 854, s. 193 (5). (6) An air operated grinder shall have a governor to prevent its operation in excess of the rated speed of the grinding wheel. R.R.O. 1990, Reg. 854, s. 193 (6). (7) The governor required by subsection (6) shall be inspected regularly and maintained in proper operation. R.R.O. 1990, Reg. 854, s. 193 (7).
Read the MINES AND MINING PLANTS on e-Laws ↗

Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.