MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854

Section 192

Cite as MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854, s. 192 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026

The text

(1) A lifting device shall be, (a) designed to safety factors recognized by good engineering practice; (b) installed in accordance with such design criteria; (c) provided with overwind protection if power operated; and (d) provided with an identification plate. R.R.O. 1990, Reg. 854, s. 192 (1); O. Reg. 34/14, s. 12. (2) The maximum load that a lifting device may carry, based on its design criteria, shall be established by its designer. R.R.O. 1990, Reg. 854, s. 192 (2). (3) A notice showing the maximum load established under subsection (2) shall be posted in a location visible to the operator of the device. R.R.O. 1990, Reg. 854, s. 192 (3). (4) Except during testing, the maximum load established under subsection (2) shall not be exceeded. R.R.O. 1990, Reg. 854, s. 192 (4). (5) Each component that may affect the safe operation of a lifting device shall be examined and tested by a competent person before initial use and thereafter at intervals not exceeding one year. R.R.O. 1990, Reg. 854, s. 192 (5). (6) The dates, findings and names of the competent persons performing the examinations and tests prescribed in subsection (5) shall be recorded and the records shall be kept available for inspection. R.R.O. 1990, Reg. 854, s. 192 (6). (7) Where a combination of lifting devices is used simultaneously, the work shall be supervised by a competent person. R.R.O. 1990, Reg. 854, s. 192 (7).
Read the MINES AND MINING PLANTS on e-Laws ↗

Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.