MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854
Section 185
Cite as MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854, s. 185 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026
The text
(1) In this section,
“machine” includes a prime mover, transmission equipment and thing. O. Reg. 31/04, s. 10.
(2) A machine that has an exposed moving part that may endanger the safety of any person shall be fenced or guarded unless its position, construction or attachment provides equivalent protection. O. Reg. 31/04, s. 10.
(3) A machine shall be provided with a device that automatically prevents a worker operating it from coming in contact with any moving part. O. Reg. 31/04, s. 10.
(4) The travelway of a counterweight shall be guarded or located to prevent,
(a) inadvertent entry thereto by a worker; and
(b) injury to a worker should the counterweight become detached from its fastenings. O. Reg. 31/04, s. 10.
(5) Clearance sufficient for the safety of a worker shall be provided from the path of travel of,
(a) a load carried by a machine;
(b) a moving part of a machine; and
(c) another machine. O. Reg. 31/04, s. 10.
(6) A revolving set screw, bolt, key or other similar device shall be recessed, encased or guarded to prevent inadvertent contact by a worker. O. Reg. 31/04, s. 10.
(7) If any work is being done on a machine,
(a) the moving parts shall be stopped;
(b) any stored energy that could be a hazard to workers shall be dissipated or contained;
(c) energy isolating devices shall be installed if the machine is not already equipped with them; and
(d) all energy isolating devices shall be properly engaged, locked and tagged. O. Reg. 31/04, s. 10; O. Reg. 69/23, s. 27.
(8) Before doing any work to which subsection (7) applies, a worker shall verify, by testing, that the requirements of that subsection have been complied with. O. Reg. 31/04, s. 10.
(9) A tag required by clause (7) (d) shall,
(a) be secured to prevent its accidental removal;
(b) state the reason the energy isolating devices are locked and tagged;
(c) show the name of the person responsible for locking and tagging the energy isolating devices; and
(d) show the date on which the energy isolating devices were locked and tagged. O. Reg. 31/04, s. 10.
(10) If it is not practical to comply with subsection (7), work to which that subsection applies may be done if, while it is being done, barriers, shields or other effective precautions are used or taken for the safety of a worker. O. Reg. 31/04, s. 10; O. Reg. 265/15, s. 12.
Read the MINES AND MINING PLANTS on e-Laws ↗
Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.