MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854

Section 181

Cite as MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854, s. 181 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026

The text

(1) An explosive actuated fastening tool shall, (a) when in storage be, (i) accessible only to an authorized worker, and (ii) kept in a locked container; and (b) be of a type and design that conforms to CAN3-Z166-M85 Series “Powder Actuated Fastening Tools”. O. Reg. 174/01, s. 4 (1); O. Reg. 34/14, s. 8. (1.1) An explosive actuated tool or explosive actuated system shall be, (a) maintained in proper condition; and (b) serviced in accordance with the manufacturer's recommendations. O. Reg. 174/01, s. 4 (1). (2) The shells for use with an explosive actuated tool or explosive actuated system shall, (a) be identified as to size and strength; (b) be kept in containers which contain only one size and strength; (c) not be left unattended except when in storage; and (d) when in storage be, (i) accessible only to an authorized worker, and (ii) kept in a locked container. R.R.O. 1990, Reg. 854, s. 181 (2); O. Reg. 174/01, s. 4 (2). (3) The operator of an explosive actuated tool or explosive actuated system shall, (a) be a competent person; (b) operate the tool or system in accordance with the manufacturer’s instructions; and (c) ensure before use that the barrel is clean and free from any obstruction. R.R.O. 1990, Reg. 854, s. 181 (3); O. Reg. 174/01, s. 4 (3, 4).
Read the MINES AND MINING PLANTS on e-Laws ↗

Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.