MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854
Section 147
Cite as MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854, s. 147 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026
The text
(1) A worker performing blasting operations shall not permit any person to return to a workplace affected by the operation until the applicable minimum period of time described in this section has elapsed. O. Reg. 779/94, s. 3.
(2) If safety fuses are used, the minimum period is,
(a) 10 minutes after the worker performing the blasting operations hears the last shot, if a single fuse is used; or
(b) 30 minutes after the worker performing the blasting operations hears the last shot, if more than one fuse is used. O. Reg. 779/94, s. 3.
(3) In the case of a misfire when at least one safety fuse is used, the minimum period is 30 minutes after a reblast. O. Reg. 779/94, s. 3.
(4) If detonators that are not safety fuses are used, the minimum period is,
(a) the time for the blasting contaminants to clear, if one detonator is used; or
(b) 10 minutes after the worker performing the blasting operations hears the last shot, if more than one detonator is used. O. Reg. 779/94, s. 3.
(5) If the worker performing the blasting operations does not hear a shot when using detonators that are not safety fuses, the minimum period is 10 minutes after,
(a) the worker has disconnected the lead wires from the power source and short-circuited them and locked the blasting switch, if any, in the open position; or
(b) the worker has disconnected the initiation device from the blasting system. O. Reg. 779/94, s. 3.
Read the MINES AND MINING PLANTS on e-Laws ↗
Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.