MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854
Section 146
Cite as MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854, s. 146 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026
The text
Where safety fuse is used in any blasting operation,
(a) no fuse shorter than one metre shall be used;
(b) no fuse shall be lighted at a point closer than one metre from the capped end;
(c) capped fuses shall be supplied in standard lengths;
(d) the uncapped ends of fuses of the same length shall be identified;
(e) where more than one charge is to be fired, each fuse connected to a charge shall be lighted by a suitable and reliable timing device;
(f) where igniter cord is used, no connections shall be made to fuses until all holes are loaded; and
(g) where igniter cord is used, a worker shall, immediately after the ignition of the igniter cord, leave the workplace which will be affected by the blasting operation. R.R.O. 1990, Reg. 854, s. 146.
Read the MINES AND MINING PLANTS on e-Laws ↗
Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.