TIRE STANDARDS AND SPECIFICATIONS, R.R.O. 1990, Reg. 625

Section 4

Cite as TIRE STANDARDS AND SPECIFICATIONS, R.R.O. 1990, Reg. 625, s. 4 · current to November 11, 2026 · consolidated from January 25, 2019 · read from e-Laws on November 16, 2026

The text

(1) Tires shall be installed on a vehicle so as to avoid, (a) a mixture of construction types consisting of radial ply tires on the front and bias ply or belted bias ply tires on the rear; (b) a mixture consisting of 50 or 60 aspect ratio tires on the front with any aspect ratio of tires other than 50 or 60 aspect ratio, on the rear; (c) a combination of construction types or sizes of tires on an axle, except where such types or sizes are equivalent by tire industry standards; or (d) contact between tires in a dual set or a difference in overall diameter between tires in a dual set of more than thirteen millimetres or a difference in circumference of more than forty-one millimetres. R.R.O. 1990, Reg. 625, s. 4 (1). (2) Clause (1) (a) does not apply to tires fitted on a vehicle with dual rear tires. R.R.O. 1990, Reg. 625, s. 4 (2). (3) Clause (1) (c) does not apply to a temporary use spare tire, specified by a vehicle manufacturer as suitable for emergency use, if not more than one temporary use spare tire is installed on a vehicle. R.R.O. 1990, Reg. 625, s. 4 (3).
Read the TIRE STANDARDS AND SPECIFICATIONS on e-Laws ↗

Made under Highway Traffic Act, R.S.O. 1990, c. H.8.