TIRE STANDARDS AND SPECIFICATIONS, R.R.O. 1990, Reg. 625
Section 3
Cite as TIRE STANDARDS AND SPECIFICATIONS, R.R.O. 1990, Reg. 625, s. 3 · current to November 11, 2026 · consolidated from January 25, 2019 · read from e-Laws on November 16, 2026
The text
(1) Subject to subsection (2), a tire shall not be worn to the extent that in any two adjacent major grooves at three equally spaced intervals around the circumference of the tire,
(a) the tread wear indicators contact the road; or
(b) less than 1.5 millimetres of tread depth remains. R.R.O. 1990, Reg. 625, s. 3 (1).
(2) A front tire on a motor vehicle having a gross vehicle weight rating of more than 4,500 kilograms shall not be worn to the extent that less than three millimetres of tread depth remains in any two adjacent major grooves at three equally spaced intervals around the circumference of the tire. R.R.O. 1990, Reg. 625, s. 3 (2).
(3) For the purposes of subsections (1) and (2), siping on a tire, other than a tire forming part of a dual tire set on an urban transit bus, does not constitute tread. R.R.O. 1990, Reg. 625, s. 3 (3).
(4) Where the tread pattern on a tire is of such a design that no major grooves are present, the tread depth shall be determined by measurements at the locations designated by the tire manufacturer for this purpose at three equally spaced intervals around the circumference of the tire. R.R.O. 1990, Reg. 625, s. 3 (4).
Read the TIRE STANDARDS AND SPECIFICATIONS on e-Laws ↗
Made under Highway Traffic Act, R.S.O. 1990, c. H.8.