X-RAY SAFETY CODE, R.R.O. 1990, Reg. 543

Section 2

Cite as X-RAY SAFETY CODE, R.R.O. 1990, Reg. 543, s. 2 · current to November 11, 2026 · consolidated from January 1, 2026 · read from e-Laws on November 16, 2026

The text

(1) The following information is prescribed for the purpose of clause 3 (2) (a) of the Act: 1. The name of the owner of the x-ray machine. 2. The number or identifying name of the x-ray room for which approval of installation is sought. 3. The name of the manufacturer and the model number of the x-ray machine, the anticipated maximum workload, the maximum tube voltage, and the maximum tube current. 4. The thickness and nature of materials that form the boundaries of the x-ray room. 5. The occupancy of the adjacent spaces, including spaces above and below the x-ray room. 6. The percentage of the working day each adjacent space is occupied. 7. The percentage of the exposure time the useful beam is projected toward each adjacent space. (2) The following plan, to be submitted in duplicate, is prescribed for the purpose of clause 3 (2) (a) of the Act: A floor plan drawn to a scale of not less than one to fifty that indicates: 1. The compass point North. 2. The name of the owner and address of the installation. 3. The limits of travel of the x-ray tube within the room. 4. The location of the control booth or the exposure switch. 5. The position of each horizontal or erect x-ray film cassette holder. 6. The location of the darkroom and storage of unprocessed film. (3) In addition to the requirements prescribed in subsection (2) where the application for approval is for the installation of an x-ray machine in a dental facility, the floor plans shall indicate, (a) the position and limits of rotation of the chair; and (b) the position of the head of the person being irradiated. R.R.O. 1990, Reg. 543, s. 2.
Read the X-RAY SAFETY CODE on e-Laws ↗

Made under Healing Arts Radiation Protection Act, R.S.O. 1990, c. H.2.