REGISTRATIONS UNDER PART II.2 OF THE ACT — SOLAR FACILITIES, O. Reg. 350/12

Section 2

Measurement of distance

Cite as REGISTRATIONS UNDER PART II.2 OF THE ACT — SOLAR FACILITIES, O. Reg. 350/12, s. 2 · current to November 11, 2026 · consolidated from November 18, 2012 · read from e-Laws on November 16, 2026

The text

(1) For the purposes of this Regulation, a distance described in Column 1 of the following Table shall be measured horizontally and in accordance with the rules set out opposite the distance in Column 2 of the Table: Table Item | Column 1 Distance | Column 2 Rules 1. | From a noise generating equipment unit to the property boundary of a noise receptor. | 1. Measure from the point that is located on the edge of the unit and closest to the property boundary of the noise receptor. 2. Measure to the point that is located on the property boundary of the noise receptor and closest to the point from which the measurement is made. 2. | From a solar photovoltaic collector panel to the property boundary of a solar facility. | 1. Measure from the point that is located on the edge of the panel and closest to the property boundary of the solar facility when the panel is at maximum tilt. 2. Measure to the point that is located on the property boundary of the solar facility and closest to the point from which the measurement is made. (2) For the purposes of measuring a distance described in Item 2 of the Table to subsection (1), a solar facility does not include an off-property distribution line. O. Reg. 350/12, s. 2 (2).
Read the REGISTRATIONS UNDER PART II.2 OF THE ACT — SOLAR FACILITIES on e-Laws ↗

Made under Environmental Protection Act, R.S.O. 1990, c. E.19.