REGISTRATIONS UNDER PART II.2 OF THE ACT — PRINTING, O. Reg. 349/12

Section 3

Prescribed activities, s. 20.21 (1) of the Act

Cite as REGISTRATIONS UNDER PART II.2 OF THE ACT — PRINTING, O. Reg. 349/12, s. 3 · current to November 11, 2026 · consolidated from February 3, 2017 · read from e-Laws on November 16, 2026

The text

(1) Subject to subsections (3), (4) and (6), the following are prescribed activities for the purposes of subsection 20.21 (1) of the Act: 1. The use, operation, construction, alteration, extension or replacement of any structure, equipment, apparatus, mechanism or thing that, i. is used at a printing facility that meets the criteria set out in subsection (2), and ii. may discharge or from which may be discharged a contaminant into any part of the natural environment other than water. 2. The alteration of a process or rate of production with respect to any structure, equipment, apparatus, mechanism or thing that is used at a printing facility that meets the criteria set out in subsection (2) if the alteration may result in, i. a contaminant being discharged into any part of the natural environment other than water, or ii. the rate or manner of discharge of a contaminant into any part of the natural environment other than water being altered. 3. The storage of chemicals used in a printing process at a printing facility that meets the criteria set out in subsection (2). O. Reg. 349/12, s. 3 (1). (2) The criteria referred to in subsection (1) with respect to a printing facility are the following: 1. All of the criteria set out in Parts III and IV that apply in respect of a printing facility are met. 2. If the facility has the number of exhaust stacks set out in Column 1 of the following Table and the number of noise generating equipment units set out in Column 2 of the Table, the distance set out in Column 3 of the Table opposite both of those numbers is met or exceeded between, i. each exterior wall of each building at the facility and the property boundary of any noise receptor, ii. each exhaust stack that extends beyond an exterior wall of a building and the property boundary of any noise receptor, and iii. each noise generating equipment unit that extends beyond an exterior wall of a building and the property boundary of any noise receptor. Table Item | Column 1 Number of exhaust stacks | Column 2 Number of noise generating equipment units | Column 3 Distance in metres 1. | 1 or 2 | 0 | 55 2. | 3 or 4 | 0 | 75 3. | 5 or 6 | 0 | 80 4. | ≥ 0 | 1 | 85 5. | ≥ 0 | 2 | 170 6. | ≥ 0 | 3 | 180 3. The wastewater from the facility, if any, i. is transferred to a waste management system, A. that is subject to an environmental compliance approval, or B. in respect of which an activity has been registered for the purposes of subsection 20.21 (1) of the Act, ii. is discharged to a sewage works that is subject to an environmental compliance approval, or iii. is discharged to a municipal sanitary sewer. 4. If the facility is located in an area of development control within the Niagara Escarpment Planning Area, any development permit required under section 24 of the Niagara Escarpment Planning and Development Act in respect of the facility has been issued and the requirements of this Regulation are not in conflict with any conditions of the permit. O. Reg. 349/12, s. 3 (2); O. Reg. 44/15, s. 2. (3) This section does not apply in respect of any activities relating to the construction of a structure, equipment, apparatus, mechanism or thing that is used in a printing facility if the activities are carried out at a site other than a printing facility. O. Reg. 349/12, s. 3 (3). (4) This section does not apply in respect of activities engaged in at a printing facility that meets any of the following criteria: 1. A printing facility located on the same property as a facility, other than a renewable energy generation facility, at which a person engages in an activity mentioned in subsection 9 (1) or 27 (1) of the Act or subsection 53 (1) of the Ontario Water Resources Act. 2. A printing facility located on a property that is adjacent to a property on which another facility, which may or may not be a printing facility, is located, if both of the following conditions are met: i. A person at the printing facility, A. uses raw materials, products or services provided by the other facility, or B. provides raw materials, products or services to the other facility. ii. A person at the other facility engages in an activity mentioned in subsection 9 (1) or 27 (1) of the Act or subsection 53 (1) of the Ontario Water Resources Act and, A. uses raw materials, products or services provided by the printing facility, or B. provides raw materials, products or services to the printing facility. 3. A printing facility located in a building that contains more than one unit, at least one of which is not occupied by the printing facility. 4. A printing facility at which a person engages in, i. lithographic printing and screen printing, ii. newspaper lithographic printing and sheet-fed lithographic printing, or iii. newspaper lithographic printing and non-heatset web lithographic printing. 5. Subject to subsection (5), a printing facility at which a person engages in printing that is not digital printing, lithographic printing or screen printing. 6. A printing facility that has more than six exhaust stacks. 7. A printing facility that has more than three noise generating equipment units. 8. A printing facility of a class identified by NAICS code 561430 (Business service centres), 812921 (Photo finishing laboratories (except one-hour)) or 812922 (One-hour photo finishing). O. Reg. 349/12, s. 3 (4). (5) Paragraph 5 of subsection (4) does not apply if the only printing that a person engages in other than digital printing, lithographic printing or screen printing is printing carried out through the use of a digital printing production assembly using ink that is not organic solvent based liquid ink, water based liquid ink or ultraviolet ink and any pre-press and post-press operations in respect of that printing. O. Reg. 349/12, s. 3 (5). (6) This section does not apply in respect of the use, operation, construction, alteration, extension or replacement of a standby power system at a printing facility. O. Reg. 349/12, s. 3 (6). (7) For the purposes of determining the number of exhaust stacks at a printing facility under this section, the only exhaust stacks that shall be counted are those that have a volumetric flow rate that is greater than 0.472 cubic metres per second as specified at 20 degrees Celsius and 101.3 kilopascals. O. Reg. 349/12, s. 3 (7).
Read the REGISTRATIONS UNDER PART II.2 OF THE ACT — PRINTING on e-Laws ↗

Made under Environmental Protection Act, R.S.O. 1990, c. E.19.