REGISTRATIONS UNDER PART II.2 OF THE ACT — AUTOMOTIVE REFINISHING, O. Reg. 347/12

Section 1

Interpretation

Cite as REGISTRATIONS UNDER PART II.2 OF THE ACT — AUTOMOTIVE REFINISHING, O. Reg. 347/12, s. 1 · current to November 11, 2026 · consolidated from March 6, 2015 · read from e-Laws on November 16, 2026

The text

In this Regulation, “automotive refinishing” means the application of coating on or the repair or customization of a motor vehicle body or parts of a motor vehicle body and the repair or customization of the interior of a motor vehicle; (“finition automobile”) “automotive refinishing facility” means a facility where automotive refinishing is done; (“installation de finition automobile”) “business day” means a day that is not a Saturday or a holiday within the meaning of section 87 of the Legislation Act, 2006; (“jour ouvrable”) “coating” means a product that forms a film when it is applied to a surface for a protective or any other refinishing purpose, but does not include a product used to carry out metal plating; (“revêtement”) “coating application rate” means the number of litres of coating sprayed in a one-hour period; (“taux d’application de revêtement”) “electrostatic spraying” means a method of applying an electrically charged coating to an object where the coating is attracted to the object by the electrostatic potential between it and the object; (“pulvérisation électrostatique”) “facility-wide coating application rate” means the total of the coating application rates from all coating spray sources at an automotive refinishing facility; (“taux d’application de revêtement à l’échelle de l’installation”) “HVLP spray equipment” means equipment, (a) that bears a permanent label identifying the equipment as HVLP spray equipment, (b) that is used to apply coating at a high volume and under low pressure, and (c) that is designed and operated with an atomizing air pressure between 0.1 and 10 pounds per square inch, as measured at the centre of the air cap and the centre of the air cap horns; (“équipement de pulvérisation HVBP”) “Niagara Escarpment Planning Area” has the same meaning as in the Niagara Escarpment Planning and Development Act; (“zone de planification de l’escarpement du Niagara”) “noise receptor” means a permanent or seasonal residence, hotel, motel, long-term care home, retirement home, hospital, campground, child care facility, educational facility or place of worship and includes a vacant lot that has been zoned to permit such a building or campground; (“récepteur de bruit”) “property boundary” means, (a) in respect of a noise receptor, the boundary of the property on which the noise receptor is situated, and (b) in respect of an automotive refinishing facility, the boundary of the property on which the automotive refinishing facility is situated; (“limite de propriété”) “sewage works” has the same meaning as in the Ontario Water Resources Act; (“station d’épuration des eaux d’égout”) “spray booth” means a structure used for coating operations by spray application and incorporating the capability of entrapping and capturing coating overspray; (“cabine de pulvérisation”) “transfer efficiency” means the ratio, expressed as a percentage, of the amount of coating transferred to the surface of a motor vehicle or a part of a motor vehicle to the total amount of coating sprayed; (“efficacité de transfert”) “waste management system” has the same meaning as in Part V of the Act. (“système de gestion des déchets”) O. Reg. 347/12, s. 1.
Read the REGISTRATIONS UNDER PART II.2 OF THE ACT — AUTOMOTIVE REFINISHING on e-Laws ↗

Made under Environmental Protection Act, R.S.O. 1990, c. E.19.