Integrated Accessibility Standards, O. Reg. 191/11
Section 80.26
Exterior paths of travel, curb ramps
Cite as Integrated Accessibility Standards, O. Reg. 191/11, s. 80.26 · current to November 11, 2026 · consolidated from March 30, 2026 · read from e-Laws on November 16, 2026
The text
(1) Where a curb ramp is provided on an exterior path of travel, the curb ramp must align with the direction of travel and meet the following requirements:
1. The curb ramp must have a minimum clear width of 1,200 mm, exclusive of any flared sides.
2. The running slope of the curb ramp must,
i. be a maximum of 1:8, where elevation is less than 75 mm, and
ii. be a maximum of 1:10, where elevation is 75 mm or greater and 200 mm or less.
3. The maximum cross slope of the curb ramp must be no more than 1:50.
4. The maximum slope on the flared side of the curb ramp must be no more than 1:10.
5. Where the curb ramp is provided at a pedestrian crossing, it must have tactile walking surface indicators that,
i. have raised tactile profiles,
ii. have a high tonal contrast with the adjacent surface,
iii. are located at the bottom of the curb ramp,
iv. are set back between 150 mm and 200 mm from the curb edge,
v. extend the full width of the curb ramp, and
vi. are a minimum of 610 mm in depth. O. Reg. 413/12, s. 6.
(2) In this section,
“curb ramp” means a ramp that is cut through a curb or that is built up to a curb. O. Reg. 413/12, s. 6.
Read the Integrated Accessibility Standards on e-Laws ↗
Made under Accessibility for Ontarians with Disabilities Act, 2005, S.O. 2005, c. 11.