Performance Standards for the Practice of Professional Land Surveying, O. Reg. 216/10

Section 17.2

Plan requirements where no registration or deposit

Cite as Performance Standards for the Practice of Professional Land Surveying, O. Reg. 216/10, s. 17.2 · current to November 11, 2026 · consolidated from January 1, 2026 · read from e-Laws on November 16, 2026

The text

(1) A plan prepared as a result of a cadastral survey that will not be registered or deposited in the registry system or the land titles system shall, (a) be produced in a hard copy or electronic format that is of durable quality suitable for long-term reproduction and preservation; (b) be rectangular; (c) be drawn and signed physically or electronically; (d) be drawn to a scale or scales sufficient for clarity of all particulars on the plan; (e) be prepared to a drafting standard that will permit legible and accurate copies to be made from it; and (f) if any colour appears on the plan, contain a note on the face of the plan indicating that the original was in colour. O. Reg. 507/21, s. 6. (2) A plan prepared under subsection (1) that is to be delivered electronically shall include the following notation below the scale bar required by clause 18 (1) (h): The intended plot size of this plan is __mm in width by __mm in height when plotted at a scale of 1:__ . (3) The only handwriting to appear on a plan shall be the original signatures of persons required to sign the plan and the dates of the signatures. O. Reg. 507/21, s. 6. (4) Despite clauses (1) (a) and (c), a plan may be in whole or in part a photographic reproduction on plastic material that is of durable quality and will not crack or break, but all additions to the photographic reproduction shall be in black adhesion type ink and signatures shall not be reproductions. O. Reg. 507/21, s. 6. (5) Despite clause (1) (c), the title, legend and margin and any applicable certificates and forms prescribed by the regulations under which the plan is prepared may be pre-printed on a plan in a manner that is permanent and permits legible and accurate copies of the plan to be made. O. Reg. 507/21, s. 6. (6) In this section, “intended plot size” means the intended overall physical dimensions of a plan, including a 15 mm plan margin, when a plan is printed at the scale at which the plan was drawn. O. Reg. 507/21, s. 6.
Read the Performance Standards for the Practice of Professional Land Surveying on e-Laws ↗

Made under Surveyors Act, R.S.O. 1990, c. S.29.