certification of drinking water system Operators and water quality analysts, O. Reg. 128/04

Schedule 1.2

Cite as certification of drinking water system Operators and water quality analysts, O. Reg. 128/04, Schedule 1.2 · current to November 11, 2026 · consolidated from December 3, 2021 · read from e-Laws on November 16, 2026

The text

Schedule 1.2 DISTRIBUTION SUBSYSTEMS (POINTS SYSTEM) 1. The number of points applicable to a distribution subsystem is determined by applying the following rules and the Tables set out in this Schedule: 1. The number of points applicable to a distribution subsystem based on its size is the greatest of the following, to a maximum of 10 points: i. 1 point for every 4,500 cubic metres of average daily design flow. ii. 1 point for every 4,500 cubic metres of average daily flow in peak month. iii. 1 point for every 100 kilometres of water main. 2. The number of points applicable to a distribution subsystem based on the size of its piping is the following: i. 1 point applies for every 10 per cent of the subsystem’s piping that is less than 600 millimetres in diameter, to a maximum of 5 points. ii. 1 point applies for every 10 per cent of the subsystem’s piping that is 600 millimetres or more in diameter. 3. The number of points applicable to a distribution subsystem with respect to bacteriological and biological laboratory control by subsystem personnel, as determined by applying Table 4 set out in this Schedule, is the greatest of the numbers set out in Column 2 of that Table that applies to the subsystem. 4. The number of points applicable to a distribution subsystem with respect to chemical and physical laboratory control by subsystem personnel, as determined by applying Table 5 set out in this Schedule, is the greatest of the numbers set out in Column 2 of that Table that applies to the subsystem. Table 1 Points based on chemical addition Item | Column 1 Chemical addition | Column 2 Number of points 1. | Re-chlorination within distribution system | 5 2. | pH adjustment by chemical addition | 4 3. | Stability or corrosion control by chemical addition | 4 Table 2 Points based on operating systems Item | Column 1 Operating systems | Column 2 Number of points 1. | Pressures in subsystem are less than 150 psi | 2 2. | Pressures in subsystem are 150 psi or more | 3 3. | Subsystem has single pressure zone | 2 4. | Subsystem has multiple pressure zones with no pressure control | 5 5. | Subsystem has multiple pressure zones with pressure control | 10 6. | Subsystem has single speed, manually operated pumps | 10 7. | Subsystem has single speed, automatically operated pumps | 3 8. | Subsystem has variable speed pumps | 4 9. | Subsystem has more than one variable speed pump to one pressure zone | 2 10. | Subsystem has surge tanks | 2 11. | Subsystem has above ground water storage | 5 12. | Subsystem has in ground water storage | 6 13. | Subsystem has pressure reducing valves | 3 14. | Subsystem has pressure relief valves | 3 15. | Subsystem has pneumatic control valves | 3 16. | Subsystem has motorized valves | 3 17. | Subsystem has elevation valves | 3 Table 3 Points based on subsystem specifications Item | Column 1 Subsystem specifications | Column 2 Number of points 1. | Water main materials include cement and iron, ductile iron, polyvinyl chloride, asbestos cement or polyethylene | 2 2. | Water main materials include concrete pressure pipe | 3 3. | Water main materials include steel | 3 4. | Water main materials include other materials | 3 5. | Non-residential meters on subsystem include flow meters with register only | 2 6. | Non-residential meters on subsystem include flow and pressure meters with register and chart | 2 7. | Non-residential meters on subsystem include flow and pressure meters in a supervisory control and data acquisition (SCADA) system | 3 8. | Subsystem instrumentation has manual controls | 3 9. | Subsystem instrumentation has semi-automatic controls | 2 10. | Subsystem instrumentation has fully automatic controls | 2 11. | Subsystem instrumentation has supervisory control and data acquisition (SCADA) system | 3 Table 4 Points based on Bacteriological and biological laboratory control by subsystem personnel Item | Column 1 Bacteriological and biological laboratory control by subsystem personnel | Column 2 Number of points 1. | Subsystem personnel perform bacteriological tests for non-regulatory purposes | 4 2. | Subsystem personnel do biological identification | 7 3. | Lab work is performed by an accredited laboratory | 0 Table 5 Points based on chemical and physical laboratory control by subsystem personnel Item | Column 1 Chemical and physical laboratory control by subsystem personnel | Column 2 Number of points 1. | Subsystem personnel use colorimetric methods to do simple determinations such as pH or chlorine residual | 3 2. | Subsystem personnel do alkalinity or hardness determinations, titrations, jar tests, or similar tests | 5 3. | Subsystem personnel do determinations for operational parameters (e.g. aluminium) or perform advanced chemical testing beyond regulatory requirements | 7 4. | Subsystem personnel perform procedures using very sophisticated instrumentation, such as atomic absorption or gas chromatography | 10
Read the certification of drinking water system Operators and water quality analysts on e-Laws ↗

Made under Safe Drinking Water Act, 2002, S.O. 2002, c. 32.