OPERATING ENGINEERS, O. Reg. 219/01

Section 15

Chief operating engineer and chief operator

Cite as OPERATING ENGINEERS, O. Reg. 219/01, s. 15 · current to November 11, 2026 · consolidated from June 27, 2001 · read from e-Laws on November 17, 2026

The text

(1) A chief operating engineer or a chief operator, as the case may be, shall, (a) take all measures necessary to manage, operate and maintain a plant in a safe condition and shall notify the owner or user of the measures taken; (b) maintain discipline among the persons employed in the plant who are under his or her control or supervision; (c) be available to accept from the owner or user authority to hire, dismiss, promote or demote any employee in the plant under his or her control or supervision; (d) direct, supervise and train shift engineers, shift operators and operating assistants, as the case may be, in their work duties and responsibilities for the safe operation and maintenance of the plant; (e) alone authorize, approve and be responsible for all maintenance, repairs or work performed within the plant or in connection with associated equipment; (f) ensure that an accurate record of matters that may affect the safe management, operation and maintenance of the plant is made and maintained at all times; (g) be on day work; and (h) not be the day shift engineer if the person holds the position of chief operating engineer in a first or second class plant as set out in Table 2. O. Reg. 219/01, s. 15 (1). (2) When the chief operating engineer or chief operator is absent from the plant, the owner or user shall ensure that the person acting in replacement of that person is an operating engineer or operator who holds a class of certification not less than one class lower than that required to operate the plant and the person acting in replacement shall perform the same functions and have the same work schedule as the person replaced. O. Reg. 219/01, s. 15 (2). (3) Despite subsection (2), an alternative arrangement may be made for replacing the absent person as long as that arrangement is consistent with the safe operation of the plant. O. Reg. 219/01, s. 15 (3). (4) The holder of an operating engineer certificate of qualification who has received documented training specific to the equipment of the fuel, air delivery and associated combustion systems may service and maintain such equipment but shall not engage in the installation or alteration from the original design and set-up at and related to the registered plant under Ontario Regulation 220/01 (Boilers and Pressure Vessels). O. Reg. 219/01, s. 15 (4). (5) In this section, “day work” means work done between 6 a.m. and 6 p.m. on a Monday, Tuesday, Wednesday, Thursday or Friday during the management hours of the plant’s host facility. O. Reg. 219/01, s. 15 (5).
Read the OPERATING ENGINEERS on e-Laws ↗

Made under Technical Standards and Safety Act, 2000, S.O. 2000, c. 16.