OPERATING ENGINEERS, O. Reg. 219/01

Section 14

Plant staffing

Cite as OPERATING ENGINEERS, O. Reg. 219/01, s. 14 · current to November 11, 2026 · consolidated from June 27, 2001 · read from e-Laws on November 17, 2026

The text

(1) In addition to the requirements set out in Tables 2, 3, 4, 5, 6 and 7, the owner or user, as the case requires, of a plant shall, (a) employ and designate an operating engineer or operator having the qualifications required of a chief operating engineer or chief operator of the plant, as the case requires; (b) provide a copy of the appointment of the plant’s chief operating engineer or chief operator, to the chief officer, and upon request, to an inspector upon an inspection, and inform the chief officer, of any change of such appointment; and (c) provide the chief operating engineer or chief operator of the plant with the means necessary to ensure that the plant is safely managed, operated and maintained in accordance with the Act and this Regulation. O. Reg. 219/01, s. 14 (1). (2) No owner or user of a plant shall employ or designate more than one chief operating engineer or chief operator, as the case requires, for the plant. O. Reg. 219/01, s. 14 (2). (3) No operating engineer or operator shall be the chief operating engineer, chief operator, shift engineer or shift operator of more than one plant at any one time unless such plants are part of a common installation or are on one property. O. Reg. 219/01, s. 14 (3). (4) An owner or user of a plant shall employ a sufficient number of qualified operating engineers or operators, or both, to operate the plant and its installations in accordance with the Act and this Regulation consistent with the plant’s size and equipment and such additional number of operating engineers or operators as may be required to ensure the safe operation of the plant. O. Reg. 219/01, s. 14 (4). (5) The chief operating engineer or chief operator of the plant shall ensure, (a) that a qualified operating engineer or operator is on duty as the shift engineer or shift operator of the plant at any time any unit in the plant is operating; and (b) that a qualified operating engineer or operator is on shift to operate the plant and is providing the required supervision for each installation or group of installations that is operating. O. Reg. 219/01, s. 14 (5). (6) In any type of power plant, the senior class of certification for an operating engineer required in Table 2 for any component of the total registered plant shall be considered the class of the chief operating engineer. O. Reg. 219/01, s. 14 (6). (7) Subject to subsection (8), no person other than a qualified operating engineer or operator shall be permitted to reset any control device in a registered plant. O. Reg. 219/01, s. 14 (7). (8) In the case of the fourth class guarded plant referred to in Table 3 (B18 & B30), the chief operating engineer may direct, verbally or in writing, a person other than a qualified operating engineer or operator to reset a safety device but such a direction does not permit more than one attempt to restart before calling for assistance from a call list acceptable to the chief operating engineer. O. Reg. 219/01, s. 14 (8).
Read the OPERATING ENGINEERS on e-Laws ↗

Made under Technical Standards and Safety Act, 2000, S.O. 2000, c. 16.