Certification of Petroleum Mechanics, O. Reg. 216/01
Section 10
PM.1 certificate
Cite as Certification of Petroleum Mechanics, O. Reg. 216/01, s. 10 · current to November 11, 2026 · consolidated from August 1, 2008 · read from e-Laws on November 16, 2026
The text
(1) A person who holds a PM.1 certificate may, without supervision, service and maintain petroleum equipment and systems, and accessories essential to their operation and, in so doing, may,
(a) install and remove suction pumps, submersible pumps and related systems in accordance with manufacturer specifications and the code adoption documents referred to in Ontario Regulation 217/01 (Liquid Fuels) made under the Act and Ontario Regulation 213/01 (Fuel Oil) made under the Act;
(b) repair and maintain suction pumps and related systems, including troubleshooting, testing, repairing and replacing mechanical, hydraulic, electrical and electronic components; and
(c) repair and maintain submersible pumps, dispensers and related systems, including troubleshooting, testing, repairing and replacing mechanical, hydraulic, electrical and electronic devices. O. Reg. 216/01, s. 10 (1); O. Reg. 251/08, s. 6 (1, 2).
(2) Revoked: O. Reg. 251/08, s. 6 (3).
(3) The holder of a PM.1 certificate may, without supervision, service and maintain any type of petroleum equipment that falls within the scope of the certificate so long as the holder has the required experience and time on that type of equipment and that experience and time are documented in a form acceptable to the director. O. Reg. 216/01, s. 10 (3); O. Reg. 251/08, s. 6 (4).
(4) The holder of a PM.1 certificate who fails to meet the conditions for unsupervised work set out in subsection (3) may only service and maintain the relevant type of equipment under the direct supervision of a PM.1 certificate holder who meets those conditions. O. Reg. 251/08, s. 6 (5).
Read the Certification of Petroleum Mechanics on e-Laws ↗
Made under Technical Standards and Safety Act, 2000, S.O. 2000, c. 16.