Fuel Industry Certificates, O. Reg. 215/01

Section 29

GP certificate

Cite as Fuel Industry Certificates, O. Reg. 215/01, s. 29 · current to November 11, 2026 · consolidated from January 1, 2022 · read from e-Laws on November 16, 2026

The text

(1) A person who is the holder of a GP certificate may, (a) install and repair pipe and tubing that supplies gas in a vapour state to an appliance; and (b) alter, purge, test, repair, service or remove gas piping or tubing systems for natural gas and propane gas in the vapour state. O. Reg. 215/01, s. 29 (1). (2) When performing a function described in subsection (1), the person may do the following: 1. Install, alter, purge and test valves or regulators that are connected to an appliance downstream of the natural gas meter or propane vapour service valve. 2. Disconnect and reconnect appliances at the gas piping or tubing in order to carry out plumbing or steam repairs. 3. Connect gas piping or tubing to newly-installed or replacement natural gas or propane gas appliances. 4. Install venting. O. Reg. 215/01, s. 29 (2); O. Reg. 253/08, s. 16 (1). (3) A person referred to in subsection (1) shall not weld piping or tubing unless he or she is qualified to do so under Ontario Regulation 220/01 (Boilers and Pressure Vessels) and does so in accordance with the procedures required by that regulation. O. Reg. 215/01, s. 29 (3); O. Reg. 253/08, s. 16 (2).
Read the Fuel Industry Certificates on e-Laws ↗

Made under Technical Standards and Safety Act, 2000, S.O. 2000, c. 16.