Fuel Industry Certificates, O. Reg. 215/01
Section 28
ICE-IE certificate
Cite as Fuel Industry Certificates, O. Reg. 215/01, s. 28 · current to November 11, 2026 · consolidated from January 1, 2022 · read from e-Laws on November 16, 2026
The text
(1) A person who is the holder of an ICE-IE certificate may,
(a) install, alter, purge, activate, repair, service or remove propane or gas fuelling equipment on stationary engines or internal combustion engines for mobile industrial equipment; and
(b) install, service or remove equipment, piping, tubing or hoses on mobile industrial equipment. O. Reg. 215/01, s. 28 (1); O. Reg. 256/07, s. 7; O. Reg. 253/08, s. 15.
(2) When performing a function described in subsection (1), the person may do the following:
1. Install, service or replace approved propane or gas fuelling engine components, tubing, hoses, tanks and other related equipment for vehicles that operate on gaseous fuels.
2. Purge and pressure test the related equipment referred to in paragraph 1 and systems to ensure that they do not leak.
3. Purge propane or gas containers and lines of air and moisture.
4. Conduct visual inspections of fuel tanks or cylinders and fuelling equipment for internal combustion engines on mobile industrial equipment that are powered by propane or gas.
5. Adjust and calibrate propane and gas carburation systems. O. Reg. 215/01, s. 28 (2); O. Reg. 256/07, s. 7.
Read the Fuel Industry Certificates on e-Laws ↗
Made under Technical Standards and Safety Act, 2000, S.O. 2000, c. 16.