Pipeline Filing, N.B. Reg. 2006-3

Section 7

Change of substance to be transmitted

Cite as Pipeline Filing, N.B. Reg. 2006-3, s. 7 · current to December 18, 2020 · read from New Brunswick Acts and Regulations on November 16, 2026

The text

(1) The applicant for a permit under Part 2 of the Act in respect of a small addition to a pipeline or a permittee or a licensee who desires to use the pipeline for the transmission of a substance other than the substance authorized by the licence, or to provide for an increase in the licensed maximum operating pressure as provided by section 41 of the Pipeline Regulation - Pipeline Act, 2005, shall make an application to the Board in accordance with subsection (2). (2) An application under subsection (1) (a) shall be accompanied by three copies of a plan or plans showing (i) the pipeline in which the substance transmitted is to be changed or for which the maximum operating pressure is to be increased, (ii) details of any proposed repairs, replacements or alterations to the pipeline to accommodate the change, (iii) the extent of any new construction required for tie-ins, and (iv) details of the piping and valving arrangement at each end of the pipeline; (b) shall state the specifications for any additional piping; and (c) shall include a statement concerning (i) the history of the operation and maintenance of the pipeline, and of leakage from the pipeline, (ii) the reason for changing the substance transmitted or increasing the maximum operating pressure authorized in the licence, (iii) the condition of any used piping, valves or fittings, and (iv) such other information as the Board may require. (3) The Board may establish such testing requirements as he considers necessary before amending a licence or cancelling a licence and issuing a new licence pursuant to an application under this section. (4) Any test requirements established by the Board under subsection (1) shall be completed by the licensee to the satisfaction of the Board before authorization for a change of substance transmitted or an increase in maximum operating pressure will be approved. (5) Unless a provisional licence has been issued, a licensee shall (a) advise the Board when all work required for changing the substance transmitted or increasing the maximum operating pressure of the pipeline has been completed; and (b) apply, for an amendment of the licence or for the cancellation of the licence and the issuance of a new licence. (6) An application under this section include an assessment by a professional engineer outlining the suitability of the pipeline for the new substance or for the new maximum operating pressure.
Read the Pipeline Filing on the Province's website ↗

Made under Pipeline Act, 2005, c. P-8.5.