Hazardous Waste Regulation, B.C. Reg. 63/88

Section 30

Performance standards for waste piles

Cite as Hazardous Waste Regulation, B.C. Reg. 63/88, s. 30 · last amended July 1, 2026 · read from BC Laws on November 17, 2026

The text

(1) The owner of a waste pile must not use a waste pile to store (a) waste materials which are or contain free liquids, (b) ignitable or reactive waste, or (c) liquids in containers. (2) The owner of a waste pile must design, construct, install, maintain and operate (a) an approved containment system to prevent release of any hazardous waste or leachate, (b) an approved leak detection system to detect any leaks or migration of liquid through any required liners, and (c) an approved leachate collection system. (3) A waste pile is in a non-compliance situation, with regard to groundwater quality, when analytical data from upgradient and downgradient groundwater monitoring wells for any parameters or chemical constituents are significantly different using approved statistical methods. (4) The owner of a waste pile must design, construct and maintain a system capable of preventing water from draining onto the site containing the waste pile during a storm with a magnitude that is exceeded, on average, only once in 25 years. (5) The owner of a waste pile must ensure that any discharge of liquid effluent to the environment, to storm sewers or to a municipal or industrial effluent treatment works which results from the waste pile meets the effluent criteria prescribed in Schedule 1.2. (6) If particulate matter, subject to wind dispersal, is placed on the waste pile, the owner must cover or otherwise manage the facility to prevent dispersal by wind. (7) The owner of a waste pile must during closure remove (a) all stored waste, and (b) any affected underlying soil to an approved depth.
Read the Hazardous Waste Regulation on BC Laws ↗

Made under Environmental Management Act, SBC 2003, c. 53.