Energy Resource Road Regulation, B.C. Reg. 56/2013

Section 15.1

Streams and stream crossings

Cite as Energy Resource Road Regulation, B.C. Reg. 56/2013, s. 15.1 · last amended September 1, 2023 · read from BC Laws on November 17, 2026

The text

(1) A permit holder who constructs, operates, maintains or deactivates an energy resource road must comply with the protection measures, whether the road right of way is on Crown land or land other than Crown land. (2) A permit holder who uses an energy resource road must comply with the protection measures, whether the road right of way is on Crown land or on land other than Crown land, as though that use were an energy resource activity. (3) A road permit holder must not construct or place at a stream crossing for the energy resource road anything except a bridge, culvert, ice bridge or snow fill. (4) A road permit holder must ensure that (a) any abutments, footings and scour protection of bridges and culverts associated with the energy resource road are located outside stream channels, and (b) equipment used for the construction, operation, maintenance or deactivation of the energy resource road is not located in a stream channel unless (i) the stream channel is dry, or (ii) the stream is frozen to the bottom.
Read the Energy Resource Road Regulation on BC Laws ↗

Made under Energy Resource Activities Act, SBC 2008, c. 36.