Energy Resource Road Regulation, B.C. Reg. 56/2013
Section 13
Road maintenance: technical
Cite as Energy Resource Road Regulation, B.C. Reg. 56/2013, s. 13 · last amended September 1, 2023 · read from BC Laws on November 17, 2026
The text
(1) A road permit holder must
(a) ensure that road surface and slope drainage systems, including inlets, drainage structures, ditches, culverts, bridges, road crowning, insloping and outsloping, are functional,
(b) remove all vegetative growth and cuttings from road surfaces, roadsides and inlets from drainage structures and ditches if
(i) the vegetative growth impedes or reduces sight distance to the extent that the road is not safe for use by permit holders,
(ii) the removal of the vegetative growth is necessary to enable placement of snow that has been removed from the road at a sufficient distance from the road surface to maintain the sight distance that is adequate for the safe use of the road by motor vehicles, or
(iii) the vegetative growth is encroaching on the road surface such that the usable road width has been reduced to the extent that vehicles cannot safely pass each other at road widenings or turnouts,
(c) unless the surface consists of ballast rock surfaces, grade the surface of the energy resource road to facilitate industrial use, provide proper road surface drainage and prevent pooling on the surface by
(i) grading during industrial use of the road as often as needed, avoiding the creation of berms along shoulders, to provide a road surface that self drains,
(ii) grading and shaping the existing road surface and shoulders, including turnouts,
(iii) placing surface aggregate where necessary to provide a surface that self drains,
(iv) loosening surfacing materials to a depth sufficient to remove potholes, rutting or washboarding without causing contamination of the surfacing materials with subgrade materials or unsuitable ditch materials, and
(v) grading only when the moisture content is suitable,
(d) maintain turnout size, number and location to accommodate the vehicles that are in regular use on the road, and
(e) ensure that signs, posts and markers, if any, are legible and visible.
(2) If a road permit holder is using the energy resource road in winter, the road permit holder must
(a) remove snow from all or part of the travelled portion of the road, including sufficient turnouts, to provide for efficient and safe use by permit holders of the road,
(b) remove snow to create breaches in snow berms for wildlife crossings,
(c) not undercut cut slopes,
(d) not blade gravel or other surfacing materials off of the road,
(e) remove snow only from the portions of the road having roadbed support, including turnouts, and reshape any over-width ploughing as necessary to define the usable width,
(f) if chains on the vehicles used to carry out energy resource activities are not suitable or sufficient to enable safe use of the frozen energy resource road, add sand to the bladed road surface as and when required to provide sufficient traction for the vehicles, and
(g) during periods of snowmelt,
(i) wing back or breach snow berms to facilitate surface drainage in a manner that prevents water flow along the road, and
(ii) keep roadbed drainage ditches, drainage dips and culverts functional.
Read the Energy Resource Road Regulation on BC Laws ↗
Made under Energy Resource Activities Act, SBC 2008, c. 36.