Processing Facility Regulation, B.C. Reg. 48/2021

Section 2

Adopted codes and standards

Cite as Processing Facility Regulation, B.C. Reg. 48/2021, s. 2 · last amended March 10, 2026 · read from BC Laws on November 17, 2026

The text

(1) In this section: “API” means the American Petroleum Institute; “ASME” means the American Society of Mechanical Engineers; “CSA” means the CSA Group; “NFPA” means the National Fire Protection Association. (2) The following codes and standards are adopted for the purposes of this regulation: (a) API Standard 520, Sizing, Selection, and Installation of Pressure-relieving Devices; (b) API Standard 521, Pressure-relieving and Depressuring Systems; (c) API Standard 526, Flanged Steel Pressure-relief Valves; (d) API Standard 527, Seat Tightness of Pressure Relief Valves; (e) API Standard 537, Flare Details for Petroleum, Petrochemical, and Natural Gas Industries; (f) API Standard 570, Piping Inspection Code: In-service Inspection, Rating, Repair, and Alteration of Piping Systems; (g) API Standard 2000, Venting Atmospheric and Low-pressure Storage Tanks; (h) API Standard 2510, Design and Construction of LPG Installations; (i) ASME B31.3, Process Piping; (j) CSA B149.1, Natural gas and propane installation code; (k) CSA Z767, Process safety management, except clause 7.4; (l) NFPA 2, Hydrogen Technologies Code. (3) Subject to anything to the contrary in a processing facility permit, the codes and standards referred to in (a) subsection (2) are adopted as amended from time to time, and (b) subsection (2) (b) are adopted only in relation to processing facilities for which construction begins on or after March 4, 2021. (4) For greater certainty, nothing in the description of a program under this regulation is intended to limit a requirement, condition or prohibition in the codes and standards.
Read the Processing Facility Regulation on BC Laws ↗

Made under Energy Resource Activities Act, SBC 2008, c. 36.