Smart Meters and Smart Grid Regulation, B.C. Reg. 368/2010

Section 1

Definitions

Cite as Smart Meters and Smart Grid Regulation, B.C. Reg. 368/2010, s. 1 · last amended December 27, 2012 · read from BC Laws on November 17, 2026

The text

In this regulation: “Act” means the Clean Energy Act; “automation-enabled device” means a device that, when installed on the authority's electric system, is capable of being used by the authority, at a location remote from the device, to control the flow of electricity; “connectivity model” means a computer model of the electric distribution system identifying all of the following: (a) the locations at which eligible premises are connected to the electric distribution system; (b) the locations known to the authority at which unmetered buildings, structures or equipment are connected to the electric distribution system; (c) the locations of (i) distribution transformers, (ii) distribution circuit conductors, (iii) substations, (iv) system devices, and (v) switches, that are within the electric distribution system; (d) the locations of generators connected to the electric distribution system; (e) the phase and direction of the electricity flowing through the conductors referred to in paragraph (c); (f) whether or which of the distribution circuit conductors connected to switches referred to in paragraph (c) are energized; “electric distribution system” means the equipment of the authority that is energized at less than 60 kilovolts and is used by the authority to provide electricity at less than 60 kilovolts; “electricity balance analysis” means an analysis of the electricity in a portion of the electric distribution system, including an analysis of the amount of electricity that (a) is measured by the smart meters at all eligible premises supplied from that portion, (b) is measured by the system devices installed on that portion, (c) is supplied from that portion to unmetered loads known to the authority, and (d) is lost in that portion because of resistance or another cause known to the authority; “eligible premises” means a building, structure or equipment of a customer of the authority if the building, structure or equipment is connected to the electric distribution system and has an electricity meter, but does not include a building, structure or equipment where it is impracticable for the authority to install a smart meter; “in-home feedback device” means a device that is capable of (a) displaying (i) a smart meter's measurements of electricity supplied to an eligible premises, and (ii) the cost of the electricity measured by the smart meter, and (b) transmitting information in digital form to and receiving information in digital form from a smart meter with which the authority has established a secure telecommunications link; “system device” means a device, including a distribution system meter and a sensor, that, when installed on the electric distribution system, is capable of (a) measuring and recording measurements of electricity as frequently as smart meters, (b) transmitting and receiving information in digital form, (c) measuring bi-directional flow of electricity, and (d) being configured by the authority at a location either remote from or close to the device.
Read the Smart Meters and Smart Grid Regulation on BC Laws ↗

Made under Clean Energy Act, SBC 2010, c. 22.