Drilling and Production Regulation, B.C. Reg. 282/2010
Section 52
Seals
Cite as Drilling and Production Regulation, B.C. Reg. 282/2010, s. 52 · last amended April 1, 2025 · read from BC Laws on November 17, 2026
The text
(1) An official may seal or cause to be sealed any or all valves or meters installed at a well or on any pipeline, tank or other receptacle used for the storage or transportation of oil or other fluid produced or withdrawn from the well, and may remove or authorize the removal of such seals.
(2) An official must notify the permit holder, orally or in writing, of the affixing of a seal under subsection (1) and of the reasons for taking that action.
(3) If notice under subsection (2) is given orally, an official, within 48 hours, must provide in writing the notice referred to in subsection (2).
(4) A permit holder must not remove or tamper with any seal affixed under subsection (1).
(5) Despite subsection (4), a permit holder may remove a seal affixed under subsection (1)
(a) in case of emergency, in which case the person must notify the regulator of the removal without delay, or
(b) if the permit holder has not received notice as required under subsections (2) and (3).
Read the Drilling and Production Regulation on BC Laws ↗
Made under Energy Resource Activities Act, SBC 2008, c. 36.