Drilling and Production Regulation, B.C. Reg. 282/2010

Section 41

Venting and fugitive emissions

Cite as Drilling and Production Regulation, B.C. Reg. 282/2010, s. 41 · last amended April 1, 2025 · read from BC Laws on November 17, 2026

The text

(1) A permit holder must not vent gas unless the gas heating value, volume or flow rate is insufficient to support stable combustion and (a) the venting is conducted in a manner that does not constitute a safety hazard, (b) the venting does not cause off-site odours, (c) the quantity of vented gas is minimized, and (d) the duration of venting is minimized. (1.1) A well permit holder who vents natural gas during a well liquids unloading event must maintain a record of the event including all of the following: (a) the dates on which the event was carried out; (b) the location of the venting; (c) the measures taken to reduce emissions of natural gas; (d) the volume, in m3, of natural gas vented. (2) A well permit holder must check each well for evidence of a surface casing vent flow, and submit the results of the check to the regulator, (a) immediately after initial completion or any recompletion of the well, (b) within one year of rig release, (c) as routine maintenance throughout the life of the well, (d) before suspension of the well, (e) before abandoning the well, and (f) before applying for a transfer of the well permit. (2.1) Subsection (2) does not apply to a well permit holder if the requirements in section 18 (10) are met. (3) On discovery of a surface casing vent flow that presents an immediate safety or environmental hazard, a well permit holder must (a) immediately take steps to eliminate the hazard, (b) immediately notify the regulator of the surface casing vent flow, and (c) submit to the regulator without delay a report respecting the surface casing vent flow and the steps taken under paragraph (a). (4) On discovery of a surface casing vent flow other than one referred to in subsection (3), a well permit holder must (a) test the flow rate and buildup pressure of the surface casing vent flow, and (b) submit a surface casing vent flow report to the regulator within 30 days of the discovery of the surface casing vent flow. (4.01) A well permit holder must ensure that the emissions of natural gas from a surface casing vent flow do not exceed 100 m3 per day. (4.02) Beginning on January 1, 2026, despite subsection (4.01) and subject to subsection (4.03), if all of the following apply, a well permit holder must ensure emissions of natural gas from a surface casing vent flow do not exceed 3 m3 per day: (a) the surface casing is cemented to the surface; (b) the surface casing is set below the base of usable groundwater; (c) the buildup pressure of the surface casing vent does not exceed 1/2 of the formation leak off pressure at the base of the surface casing. (4.03) Subsection (4.02) does not apply (a) until 90 days after discovery of the vent flow, (b) during testing of a vent flow or during a well operation, or (c) until after initial completion of a well unless a well becomes inactive in accordance with section 25 prior to initial completion of the well. (4.04) A well permit holder must notify the regulator, in electronic form, at least 7 days before taking action to control the emission of natural gas from a surface casing vent flow referred to in subsection (4.02). (4.05) A notice under subsection (4.04) must (a) demonstrate how the criteria in subsection (4.02) are met, and (b) identify the actions taken to control the emission of natural gas from a surface casing vent flow. (4.1) On discovery of an occurrence of gas migration, a permit holder must (a) immediately notify the regulator of the gas migration, (b) evaluate the cause and source of the gas migration and complete a risk assessment of the gas migration, and (c) submit to the regulator without delay a report respecting the evaluation and risk assessment completed under paragraph (b). (5) Repealed. [B.C. Reg. 286/2018, s. 3.] (6) A permit holder of a well drilled or facility constructed after the date this regulation came into force may use gas containing hydrogen sulphide for pneumatic instrumentation or to provide motive force to pumps only if the gas contains no more than 20 parts per million of hydrogen sulphide.
Read the Drilling and Production Regulation on BC Laws ↗

Made under Energy Resource Activities Act, SBC 2008, c. 36.