Drilling and Production Regulation, B.C. Reg. 282/2010
Section 31
Examination of cores
Cite as Drilling and Production Regulation, B.C. Reg. 282/2010, s. 31 · last amended April 1, 2025 · read from BC Laws on November 17, 2026
The text
(1) A person must ensure that core declared by an official as being representative of a type section is not broken or chipped.
(2) A person must ensure that breakage of core during examination at the core lab is minimized and that core is not destroyed, broken or sampled without approval of an official.
(3) With the approval of an official and subject to subsection (4), a person, on payment of the fees set out in section 19 of the Fee, Levy and Security Regulation, may examine and remove a well core from the core lab for the purpose of laboratory investigations and analysis that cannot be performed at the core lab.
(4) A person who removes a well core from the core lab must
(a) return the core within 90 days,
(b) take every reasonable precaution to prevent damage to or mixing of the core in core boxes,
(c) submit a report, including photographs, if any, of any laboratory analysis conducted on the core to the regulator within 30 days of completing the analysis,
(d) submit any thin sections cut from core to the regulator in adequate boxes labelled with the unique well identifier, well permit number and well name,
(e) label individual thin sections with the well permit number and depth,
(f) test cores in a manner acceptable to an official, and
(g) return the core immediately on the request of an official.
(5) Repealed. [B.C. Reg. 8/2014, s. 1 (b).]
Read the Drilling and Production Regulation on BC Laws ↗
Made under Energy Resource Activities Act, SBC 2008, c. 36.