Drilling and Production Regulation, B.C. Reg. 282/2010

Section 15

Protection from hazards

Cite as Drilling and Production Regulation, B.C. Reg. 282/2010, s. 15 · last amended April 1, 2025 · read from BC Laws on November 17, 2026

The text

(1) Until the well is abandoned, a well permit holder must ensure that a permanently legible and conspicuous sign is displayed and maintained at each well, and that sign must show all of the following: (a) the name of the well permit holder; (b) current emergency notification information, including a telephone number; (c) the location of the surface site of the well; (d) if the well may produce flammable gas, a flammable gas symbol from Schedule 1; (e) if the well may produce gas containing 100 ppm or greater of hydrogen sulphide, a poisonous gas symbol from Schedule 1; (f) after March 1, 2011, if the well may produce gas containing 10 ppm or greater of hydrogen sulphide, a poisonous gas symbol from Schedule 1. (2) A well permit holder must not post warning symbols where no hazard exists. (3) A well permit holder must ensure both of the following: (a) that the well site is maintained in a condition so as to minimize hazards, including but not limited to hazards associated with pits, holes, storage of materials and equipment; (b) that the well site is free of garbage, debris and derelict equipment.
Read the Drilling and Production Regulation on BC Laws ↗

Made under Energy Resource Activities Act, SBC 2008, c. 36.