Reviewable Projects Regulation, B.C. Reg. 243/2019

Section 8

Criteria for proposed modifications of industrial projects

Cite as Reviewable Projects Regulation, B.C. Reg. 243/2019, s. 8 · last amended December 15, 2025 · read from BC Laws on November 17, 2026

The text

(1) For the purposes of this Part, threshold A is met for a proposed modification of an existing facility if (a) the existing facility, were it a new facility in the same category as the existing facility as described in Column 1 of the applicable table, would meet the criteria set out opposite in Column 2, and (b) the modification will result in an increase of at least 30% in the total waste discharge from the facility. (2) In this Part, threshold B is met for a proposed modification of an existing facility if (a) the existing facility, were it a new facility in the same category as the existing facility as described in Column 1 of the applicable table, would meet the criteria set out opposite in Column 2, and (b) the modification will result in an increase in the production capacity of the facility of at least 35% but less than 50%, unless there is a decrease of 10% or more in the total waste discharge from the facility. (3) In this Part, threshold C is met for a proposed modification of an existing facility if (a) the existing facility, were it a new facility in the same category as the existing facility as described in Column 1 of the applicable table, would not meet the criteria set out opposite in Column 2, and (b) the modification will result in (i) an increase in the production capacity of the facility of at least 35%, unless there is a decrease of 10% or more in the total waste discharge from the facility, and (ii) a facility that, were it a new facility in the same category as the existing facility as described in Column 1 of the applicable table, would meet the criteria set out opposite in Column 2. (4) In this Part, threshold D is met for a proposed modification of an existing facility if (a) the existing facility, were it a new facility in the same category as the existing facility as described in Column 1 of the applicable table, would meet the criteria set out opposite in Column 2, and (b) the modification will result in an increase in the production capacity of the facility of at least 50%. Table 1 — Organic and Inorganic Chemical Industry Column 1 Project Category Column 2 New Project Column 3 Modification of Existing Project 1 All other basic inorganic chemical manufacturing (NAICS 325189; 325181). 2 Other basic organic chemical manufacturing (NAICS 325190). 3 Petrochemical manufacturing (NAICS 325110). 4 Industrial gas manufacturing (NAICS 325120). 5 Chemical fertilizer (except potash) manufacturing (NAICS 325313). 6 Mixed fertilizer manufacturing (NAICS 325314). 7 Pesticide and other agricultural chemical manufacturing (NAICS 325320). 8 Resin and synthetic rubber manufacturing (NAICS 325210; 325991). 9 Paint and coating manufacturing (NAICS 325510). 10 All other miscellaneous chemical product manufacturing (NAICS 325999). Criteria: (1) A new manufacturing facility (a) that has a production capacity of ≥ 100 000 tonnes/year, or (b) that (i) produces materials classified under the Transportation of Dangerous Goods Act 1992 (Canada) as "Explosives", "Flammable solids", "Corrosives", "Poisonous (toxic) and infectious substances" or "Oxidizing substances; organic peroxides", and (ii) has a production capacity of ≥ 5 000 tonnes/year. Criteria: (1) Modification of an existing facility that meets (a) threshold A, (b) threshold B, (c) threshold C, or (d) threshold D. Table 2 — Primary Metals Industry Column 1 Project Category Column 2 New Project Column 3 Modification of Existing Project 1 Iron and steel mills and ferro-alloy manufacturing (NAICS 331110; 331221). 2 Alumina refining and primary aluminum production (NAICS 331313). 3 Non-ferrous metal (except aluminum) smelting and refining (NAICS 331410; 331420; 331490). Criteria: (1) Subject to subsection (2), a new manufacturing facility, regardless of size. (2) If refining processes, precious metal distillate processes or ore roasting processes are integrated with ore milling operations at, or in the vicinity of, a mine site and are dedicated to the mining operations at the mine site, those processes are not reviewable as part of a project that is a reviewable project under subsection (1). Criteria: (1) Subject to subsection (2), modification of an existing facility that meets (a) threshold A, (b) threshold B, or (c) threshold D. (2) If refining processes, precious metal distillate processes or ore roasting processes are integrated with ore milling operations at, or in the vicinity of, a mine site and are dedicated to the mining operations at the mine site, those processes are not reviewable as part of a project that is a reviewable project under subsection (1). Table 3 — Non-Metallic Mineral Products Industries Column 1 Project Category Column 2 New Project Column 3 Modification of Existing Project 1 Cement manufacturing (NAICS 327310). 2 Glass manufacturing (NAICS 327214; 327215). 3 Lime manufacturing (NAICS 327410). Criteria: (1) A new manufacturing facility with a production capacity of ≥ 100 000 tonnes/year. Criteria: (1) Modification of an existing facility that meets (a) threshold A, (b) threshold B, (c) threshold C, or (d) threshold D. 4 All other non-metallic mineral product manufacturing (NAICS 327990). Criteria: (1) A new manufacturing facility, regardless of size. Criteria: (1) Modification of an existing facility that meets (a) threshold A, (b) threshold B, or (c) threshold D. Table 4 — Forest Products Industries Column 1 Project Category Column 2 New Project Column 3 Modification of Existing Project 1 Pulp manufacturing facility in one of the following NAICS codes: (a) mechanical pulp mills (NAICS 322111); (b) chemical pulp mills (NAICS 322112); (c) paper (except newsprint) mills (NAICS 322121); (d) newsprint mills (NAICS 322122); (e) paperboard mills (NAICS 322130). Criteria: (1) A new manufacturing facility, regardless of size. Criteria: (1) Modification of an existing facility that (a) meets threshold A, as it applies to a modification of the facility's pulp production capability, (b) meets threshold B, as it applies to an increase in the facility's pulp production capability, (c) meets threshold D, as it applies to an increase in the facility's pulp production capability, or (d) results in creation of a new paper or paperboard manufacturing capability with a production capacity of ≥ 250 000 tonnes/year of paper or paperboard. 2 Integrated paper or paperboard manufacturing facility in one of the following NAICS codes: (a) mechanical pulp mills (NAICS 322111); (b) chemical pulp mills (NAICS 322112); (c) paper (except newsprint) mills (NAICS 322121); (d) newsprint mills (NAICS 322122); (e) paperboard mills (NAICS 322130). Criteria: (1) A new manufacturing facility, regardless of size. Criteria: (1) Modification of an existing facility that (a) meets threshold A, as it applies to a modification in the facility's pulp production capability, (b) meets threshold B, as it applies to an increase in the facility's pulp production capability, (c) meets threshold D, as it applies to an increase in the facility's pulp production capability, or (d) results in an increase in paper or paperboard production capacity of ≥ 250 000 tonnes/year. 3 Non-integrated paper and paperboard manufacturing facility in one of the following NAICS codes: (a) mechanical pulp mills (NAICS 322111); (b) chemical pulp mills (NAICS 322112); (c) paper (except newsprint) mills (NAICS 322121; (d) newsprint mills (NAICS 322122); (e) paperboard mills (NAICS 322130). Criteria: (1) A new manufacturing facility with a production capacity of ≥ 250 000 tonnes/year. Criteria: (1) Modification of an existing facility that results in (a) for an existing project with a production capacity of ≥ 250 000 tonnes/year, an increase in paper or paperboard production capacity of ≥ 250 000 tonnes/year, or (b) the creation at the existing facility of a new pulp production capability. 4 Wood preservation (NAICS 321114). Criteria: (1) A new manufacturing facility with a production capacity of ≥ 25 000 m3/year. Criteria: (1) Modification of an existing facility that meets (a) threshold A, (b) threshold B, (c) threshold C, or (d) threshold D. 5 Sawmills (except shingle and shake mills) (NAICS 321111). Criteria: (1) A new manufacturing facility with a production capacity of ≥ 750 000 board feet/day. Criteria: (1) Modification of an existing facility that meets (a) threshold A, (b) threshold B, (c) threshold C, or (d) threshold D. 6 Hardwood veneer and plywood mills (NAICS 321211). 7 Softwood veneer and plywood mills (NAICS 321212). Criteria: (1) A new facility manufacturing (a) plywood or both plywood and veneer with a production capacity of ≥ 170 000 m3/year, or (b) veneer, but not plywood, with a production capacity of ≥ 250 000 m3/year. Criteria: (1) Modification of an existing facility that meets (a) threshold A, (b) threshold B, (c) threshold C, or (d) threshold D. 8 Particle board and fibreboard mills (NAICS 321216). 9 Waferboard mills (NAICS 321217). Criteria: (1) A new manufacturing facility with a production capacity of ≥ 150 000 m3/year. Criteria: (1) Modification of an existing facility that meets (a) threshold A, (b) threshold B, (c) threshold C, or (d) threshold D. Table 5 — Other Industries Column 1 Project Category Column 2 New Project Column 3 Modification of Existing Project 1 Pharmaceutical and medicine manufacturing (NAICS 325410). Criteria: (1) A new manufacturing facility with a production capacity of (a) ≥ 50 tonnes/year of biopharmaceutical products, or (b) ≥ 200 tonnes/year of non-biopharmaceutical products. Criteria: (1) Modification of an existing facility that meets (a) threshold A, (b) threshold B, (c) threshold C, or (d) threshold D. 2 Artificial and synthetic fibres and filaments manufacturing (NAICS 325220; 313110). 3 Textile and fabric finishing (NAICS 313310; 313320). Criteria: (1) A new manufacturing facility with a production capacity ≥ 15 000 tonnes/year. Criteria: (1) Modification of an existing facility that meets (a) threshold A, (b) threshold B, (c) threshold C, or (d) threshold D. 4 Tire manufacturing (NAICS 326210). Criteria: (1) A new facility, regardless of size. Criteria: (1) Modification of an existing facility that meets (a) threshold A, (b) threshold B, or (c) threshold D. 5 Leather and hide tanning and finishing (NAICS 316110). Criteria: (1) A new manufacturing facility with a production capacity of ≥ 500 000 m2/year. Criteria: (1) Modification of an existing facility that meets (a) threshold A, (b) threshold B, (c) threshold C, or (d) threshold D. 6 Battery manufacturing (NAICS 335910). Criteria: (1) A new facility manufacturing lead-acid batteries, regardless of size. Criteria: (1) Modification of an existing facility that meets (a) threshold A, (b) threshold B, or (c) threshold D.
Read the Reviewable Projects Regulation on BC Laws ↗

Made under Environmental Assessment Act, SBC 2018, c. 51.