Energy Efficiency Standards Regulation, B.C. Reg. 14/2015

Section 24

Label exemption for manufactured fenestration products designed for specific buildings

Cite as Energy Efficiency Standards Regulation, B.C. Reg. 14/2015, s. 24 · last amended April 24, 2023 · read from BC Laws on November 17, 2026

The text

(1) For a manufactured fenestration product, other than a door slab or glazing product, an energy efficiency verification label, a manufacturing information label and the removable label required under section 23 are not required if (a) the manufactured fenestration product is designed for a specific building, and (b) a certificate meeting the requirements set out in subsection (2) of this section is posted at the specific building site. (2) For the purposes of subsection (1) (b), the requirements for the certificate are as follows: (a) the certificate must set out (i) the U-value, as determined by a designated tester, for each manufactured fenestration product provided for the specific building, or (ii) for manufactured fenestration products to which section 25 applies, the average U-value, as determined by a designated tester, for each type of manufactured fenestration product provided for the specific building; (b) the certificate must be issued by a designated tester; (c) the certificate must be posted in plain view at the specific building site for a period of at least 120 days after the last of the manufactured fenestration products is installed in that specific building. (d) Repealed. [B.C. Reg. 35/2021, s. 11.]
Read the Energy Efficiency Standards Regulation on BC Laws ↗

Made under Energy Efficiency Act, RSBC 1996, c. 114.