Energy Efficiency Standards Regulation, B.C. Reg. 14/2015

Section 23

Additional label requirement for manufactured fenestration products

Cite as Energy Efficiency Standards Regulation, B.C. Reg. 14/2015, s. 23 · last amended April 24, 2023 · read from BC Laws on November 17, 2026

The text

(1) Subject to section 24, for the purposes of section 2 (1) (b) [prescribed label] of the Act, and in addition to an energy efficiency verification label and a manufacturing information label, a removable label that meets the requirements set out in subsection (2) of this section must be affixed to all manufactured fenestration products, other than door slabs and glazing products. (2) The removable label referred to in subsection (1) must set out the U-value, as determined by a designated tester, of a manufactured fenestration product as follows: (a) for a single operator type, the overall U-value of the manufactured fenestration product; (b) for a combination or composite manufactured fenestration product composed of 2 or more operator types, each of which has a different U-value, (i) the overall U-value of the manufactured fenestration product, or (ii) the individual U-value for each of the operator types in the manufactured fenestration product. (3) Section 5 (3) [energy efficiency verification label] applies to the removable label referred to in subsection (1) as if the removable label were an energy efficiency verification label.
Read the Energy Efficiency Standards Regulation on BC Laws ↗

Made under Energy Efficiency Act, RSBC 1996, c. 114.