Geophysical Exploration Regulation, B.C. Reg. 280/2010

Section 4

Geophysical exploration near pipeline, utility, residence, etc.

Cite as Geophysical Exploration Regulation, B.C. Reg. 280/2010, s. 4 · last amended September 1, 2023 · read from BC Laws on November 17, 2026

The text

(1) Subject to subsections (2) and (3), if a geophysical permit holder conducts geophysical exploration in the vicinity of any gas, oil or water pipeline or well, electric cable, transmission line, utility, residence or other improvement, the geophysical permit holder must not damage or interrupt the use of the pipeline, well, electric cable, transmission line, utility, residence or other improvement. (2) Subject to subsection (3), the use of an explosive or non-explosive energy source to carry out geophysical exploration in relation to a structure described in column 1 of Schedule 1 must not be conducted at a distance less than the minimum distance shown in column 2 or 3. (3) An explosive or non-explosive energy source may be used to carry out geophysical exploration in relation to a structure described in column 1 of Schedule 2 at a distance not less than the minimum distance shown in column 2 or 3 if the geophysical permit holder has the prior written consent of the owner of the structure.
Read the Geophysical Exploration Regulation on BC Laws ↗

Made under Energy Resource Activities Act, SBC 2008, c. 36.