Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation, B.C. Reg. 104/2004
Section 67
General requirements for person in charge of a plant
Cite as Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation, B.C. Reg. 104/2004, s. 67 · last amended December 31, 2024 · read from BC Laws on November 17, 2026
The text
(1) The person in charge of a plant must hold a certificate of qualification appropriate to the work to be performed in the plant.
(2) The person in charge of the plant must ensure that the plant is adequately supervised and has appropriately qualified persons working in it.
(3) Repealed. [B.C. Reg. 170/2018, Sch. 2, s. 29 (a).]
(4) A plant that employs more than 24 power engineers in the operation of the plant is required to have at least one assistant chief engineer.
(5) An individual must not be in charge of more than one plant at any time except with the approval of a provincial safety manager.
(6) If regulated plant equipment is not under the continuous attendance of a power engineer, refrigeration operator or ice facility operator and is operating under the general supervision status plant or risk assessed status plant classification,
(a) Repealed. [B.C. Reg. 170/2018, Sch. 2, s. 29 (a).]
(b) an individual with the appropriate safety awareness certificate of qualification issued under the Act must be in attendance on the premises of a plant when the plant is in operation and the power engineer, refrigeration operator or ice facility operator is not on the plant premises, and
(c) in the case of a refrigeration plant, an individual with the basic safety awareness certificate of qualification issued under the Act is required to be on the plant premises while the plant is in operation, the premises are occupied and the power engineer, refrigeration operator or ice facility operator is not on the plant premises.
(7) Repealed. [B.C. Reg. 170/2018, Sch. 2, s. 29 (a).]
Read the Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation on BC Laws ↗
Made under Safety Standards Act, SBC 2003, c. 39.