Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation, B.C. Reg. 104/2004
Section 15
Application for second class power engineer's certificate of qualification
Cite as Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation, B.C. Reg. 104/2004, s. 15 · last amended December 31, 2024 · read from BC Laws on November 17, 2026
The text
(1) An applicant for a second class power engineer's certificate of qualification must
(a) hold a first class marine engineer (motor) certificate of competency, or
(b) hold a third class power engineer's certificate of qualification or a corresponding Canadian credential, and have been employed, while in possession of that certificate or credential, for a period of not less than
(i) 24 months as chief engineer of a third class plant that is a power plant,
(ii) 24 months as a shift engineer or as an assistant chief engineer of a second class plant, or
(iii) 24 months as an assistant shift engineer or an assistant engineer performing duties, approved by a provincial safety manager, at a first class plant.
(iv) to (vi) Repealed. [B.C. Reg. 134/2009, s. 20 (a).]
(2) If an applicant has successfully completed a second class power engineering course that has been approved by a provincial safety manager, the required periods of employment referred to in subsection (1) (b) (i) to (iii) are reduced by 9 months.
(3) If an applicant holds an engineering degree, the required periods of employment for the positions and types of plants set out in subsection (1) (b) (i) to (v) are reduced by 12 months.
Read the Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation on BC Laws ↗
Made under Safety Standards Act, SBC 2003, c. 39.