Gas Safety Regulation, B.C. Reg. 103/2004

Section 8

Class A or B gas fitter may do limited electrical work

Cite as Gas Safety Regulation, B.C. Reg. 103/2004, s. 8 · last amended May 1, 2025 · read from BC Laws on November 17, 2026

The text

(1) The holder of a class A or class B gas fitter's certificate of qualification may, while employed by a licensed gas contractor or working under an operating permit, perform electrical work that is restricted to the installation, repair and maintenance of electrical wiring for solid, liquid and gaseous-fuel-fired heating equipment for any of the following: (a) connecting branch circuit wiring to the heating equipment integral connection box from a junction box or disconnect mounted in close proximity to the heating equipment; (b) class 2 circuit wiring up to a rated output of 100 Volt amps; (c) low voltage controls or 24 volt thermostats. (d) Repealed. [B.C. Reg. 134/2009, s. 8.] (2) The holder of a class A gas fitter's certificate of qualification may, in the circumstances described in subsection (1), perform electrical work that is restricted to the installation, repair and maintenance of electrical wiring for solid, liquid and gaseous-fuel-fired heating equipment for 3 phase motors or controllers integral to the heating equipment.
Read the Gas Safety Regulation on BC Laws ↗

Made under Safety Standards Act, SBC 2003, c. 39.