Gas Safety Regulation, B.C. Reg. 103/2004

Section 7

Class B gas fitter certificate of qualification

Cite as Gas Safety Regulation, B.C. Reg. 103/2004, s. 7 · last amended May 1, 2025 · read from BC Laws on November 17, 2026

The text

(1) An applicant for a class B certificate of qualification must (a) have successfully completed a gas fitting course recognized by a provincial safety manager and (i) hold a SkilledTradesBC certificate in gas fitting, plumbing, steamfitting, refrigeration or sprinkler fitting, or (ii) have held a gas utility certificate of qualification for at least 2 years, (b) be an apprentice in a gas fitting program recognized by a provincial safety manager, or (c) have an equivalent combination of experience and training acceptable to a provincial safety manager and have attained the standing acceptable to a provincial safety manager in a gas fitting course and examination that have been recognized by a provincial safety manager. (2) A class B gas fitter certificate of qualification entitles the holder to perform the installation or alteration of the following gas systems under an appropriate permit: (a) an appliance with an input of 120 kW or less that displays a label or mark as follows: (i) a certification mark; (ii) an approval mark issued under section 10 of the Act; (b) piping and vents. (c) Repealed. [B.C. Reg. 150/2011, s. 1.] (3) In addition to the work referred to in subsection (2), a person is entitled, if the conditions of subsection (4) are met, to perform the installation or alteration, under an appropriate permit, of the following: (a) a fan assisted appliance; (b) a natural draft appliance; (c) any other appliance, if the appliance has an input of 220 kW or less. (4) For the purposes of subsection (3), the conditions that must be met are as follows: (a) the appliance must display (i) a certification mark, or (ii) an approval mark issued under section 10 of the Act; (b) the person must hold a valid class B gas fitter certificate of qualification that (i) was issued on or before March 31, 2020, (ii) is marked with the designation "(GP)", and (iii) entitles the person to perform the work referred to in subsection (3).
Read the Gas Safety Regulation on BC Laws ↗

Made under Safety Standards Act, SBC 2003, c. 39.