Canada Oil and Gas Installations Regulations, SOR/96-118
Section 60
Cite as Canada Oil and Gas Installations Regulations, SOR/96-118, s. 60 · current to July 24, 2025 · regulation last amended October 6, 2020
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) The mooring system for a floating platform shall
(a) provide an anchor pattern that keeps all anchor lines, anchor chains and anchors a safe distance from existing pipelines, flow lines and other platforms;
(b) provide an anchor pattern that gives clear access to any support vessel intended to be used in operations and that clears lifeboat launching areas;
(c) be sufficiently stiff so that the excursions of the platform are within the limits established for the risers in accordance with section 62 under all operating conditions; and
(d) be sufficiently strong so that the failure of any anchor line during operations will not lead to major damage.
(2) The load factor for tension in the mooring lines of every floating platform, based on a quasi-static analysis, shall be
(a) in the operating condition with all lines intact, 3.0;
(b) in the operating condition with one line failed, 2.0;
(c) in the survival condition with all lines intact, 2.0;
(d) in the survival condition with one line failed, if the platform will not threaten another platform used for the exploration or exploitation of subsea resources, l.4; and
(e) in the survival condition with one line failed, if the platform may threaten another platform used for the exploration or exploitation of subsea resources, 2.0.
(3) The fatigue life of the mooring system of every floating platform shall be equal to at least 15 years.
(4) The mooring system of every floating platform that is to remain at the production site or drill site for longer than five years shall be designed so that its components can be inspected and replaced.
(5) The design of the mooring system of every floating platform that is intended to remain moored in the survival condition shall be based on an appropriate model test or numerical analysis.
(6) Where there is an annual probability of 10-2 of ice or icebergs being present at the site of a floating platform, the mooring system of the platform shall
(a) incorporate a primary quick release system with a remote triggering device and at least one back-up system; and
(b) have been demonstrated to be capable of permitting the quick release of the platform from its moorings and risers.
(7) Except where the floating platform may threaten another platform used for the exploration or exploitation of subsea resources, the following factors may be taken into account in determining whether a thruster-assisted mooring system using a remote control thruster system complies with subsection (2):
(a) if the remote control is manual,
(i) zero thrust, for the operating condition,
(ii) 70 per cent of the net thrust effect from all except one thruster, for the survival condition,
(iii) zero thrust, for one mooring line failed in the operating condition, and
(iv) 70 per cent of the net thrust effect from all thrusters, for one mooring line failed in the survival condition; and
(b) if the remote control is automatic,
(i) the net thrust effect from all except one thruster, for the operating condition,
(ii) the net thrust effect from all except one thruster, for the survival condition,
(iii) the net thrust from all thrusters, for one mooring line failed in the operating condition, and
(iv) the net thrust from all thrusters, for one mooring line failed in the survival condition.
(8) Mooring system components on a floating platform that interface with the mooring chain or rope, except the attachment in the chain locker for anchor chain and the steel rope attachment on the drum, shall be designed to withstand the forces due to tension required to break the chain or rope.
(9) The mooring system for a floating platform shall be designed to keep the platform on location, under any ice loads to which it may be subjected as determined pursuant to section 45, and the chain or rope shall be able to withstand, without significant damage, the abrasion forces imposed by such loads.
(10) The load factors between the estimated anchor holding power in the mooring system of a floating platform and maximum mooring line tension at the anchor shall be at least
(a) in the operating condition with all lines intact, 2.1;
(b) in the operating condition with one line failed, 1.4;
(c) in the survival condition with all lines intact, 1.4;
(d) in the survival condition with one line failed, if the platform will not threaten another platform used for the exploration or exploitation of subsea resources, 1.0; and
(e) in the survival condition with one line failed, if the platform may threaten another platform used for the exploration or exploitation of subsea resources, 1.4.
(11) For the purposes of paragraphs (2)(d) and (e), subsection (7) and paragraphs (10)(d) and (e), one platform shall be considered to threaten another platform if the platform may drift or be pushed, by environmental conditions, into the other platform when all lines fail, taking into account any action likely to be taken to bring the platform under control.
(12) All anchor winches and their stoppers, brakes, fairleads and sheaves, their attachments to the hull, and associated load- bearing structural elements for a floating platform shall be designed to withstand, without risk of permanent deformation or failure or of loss of ability to operate, the application of the breaking load of the associated anchor line with the anchor line in the most unfavourable direction.
(13) The catenary mooring system on every floating platform shall be inspected in accordance with the requirements of American Petroleum Institute RP 21, Recommended Practice for In-Service Inspection of Mooring Hardware for Floating Drilling Units.
Read the Canada Oil and Gas Installations Regulations on the Justice Laws Website ↗
Made under Canada Oil and Gas Operations Act, R.S.C. 1985, c. O-7.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.