Coal Mining Occupational Health and Safety Regulations, SOR/90-97
Section 66
Cite as Coal Mining Occupational Health and Safety Regulations, SOR/90-97, s. 66 · current to July 24, 2025 · regulation last amended January 1, 2021
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) During each shift, a hoist operator shall test the surface hoist, including the safety devices connected to it.
(2) Where tests are performed in accordance with subsection (1), the hoist operator shall test
(a) the overwind preventor to verify that the cage or trip does not travel more than 0.6 m past the top or the bottom of the run; and
(b) the speed controller with the cage midway in the shaft or with the trip part of the way along the run.
(3) Subject to subsection (4), where a surface hoist has not been operated for more than four hours, before persons are transported on that hoist, a trial wind shall be carried out over the lesser of
(a) the complete run of the cage or trip, or
(b) 400 m.
(4) Except in the case of an emergency, where a surface hoist has not been operated for any period because of an accident or defect, a full trial wind shall be carried out before lowering or hoisting is resumed.
(5) A qualified person shall test
(a) at least once every 24 hours, the overwind preventor, speed controller and other safety devices of a surface hoist that is used only for transporting persons;
(b) at least once every week, the overwind preventor, speed controller and other safety devices of a surface hoist that is used for hoisting materials; and
(c) at least once every month, the braking system of every surface hoist, including the emergency brake, overwind preventor, speed controller, other safety devices and the devices referred to in paragraph 65(1)(c) and subparagraph 65(1)(f)(ii).
(6) The hoist operator or qualified person who carries out the tests referred to in subsections (1) to (5) shall make a record of those tests in a book kept for that purpose.
Read the Coal Mining Occupational Health and Safety Regulations on the Justice Laws Website ↗
Made under Canada Labour Code, R.S.C. 1985, c. L-2.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.