Electricity and Gas Inspection Regulations, SOR/86-131
Section 37
Cite as Electricity and Gas Inspection Regulations, SOR/86-131, s. 37 · current to July 24, 2025 · regulation last amended November 23, 2018
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) The atmospheric pressure shall be calculated for a meter location by using the following equation, namely,
(a) in the International system of units,Pa = 101.560 - (0.0113 × M) kPa, or
(b) in the Imperial system of units,Pa = 14.73 - (0.0005 × F) psiawhere
(c) Pa is the calculated atmospheric pressure; and
(d) M is the number of metres of elevation of the meter location above mean sea level and F is the number of feet of elevation of the meter location above mean sea level, in either case as determined by a survey carried out by a registered surveyor or as determined from the most recent applicable topographical maps published by the Department of Energy, Mines and Resources.
(2) The atmospheric pressure declared for a meter location shall not differ from the atmospheric pressure calculated for that meter location pursuant to subsection (1) by more than
(a) in the International system of units,0.621 + (0.001 × Pga) kPa, or
(b) in the Imperial system of units,0.090 + (0.001 × Pga) psiwherePgais the average meter pressure expressed on the gauge pressure scale.
Read the Electricity and Gas Inspection Regulations on the Justice Laws Website ↗
Made under Electricity and Gas Inspection Act, R.S.C. 1985, c. E-4.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.