Electricity and Gas Inspection Regulations, SOR/86-131
Section 36
Cite as Electricity and Gas Inspection Regulations, SOR/86-131, s. 36 · current to July 24, 2025 · regulation last amended November 23, 2018
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) The pressure multiplier for any pressure converting meter shall be established by using the following equation, namely,Pm = Pb/Pswhere(a) Pm is the pressure multiplier;(b) Pb is the pressure expressed on the absolute pressure scale and used as the base pressure for the calibration of the pressure converting meter; and(c) Ps is the standard pressure expressed on the absolute pressure scale.
(2) The pressure multiplier for any meter other than a pressure correcting meter shall be established by using the following equation, namely,Pm = (Pga + Pa)/Pswhere(a) Pm is the pressure multiplier;(b) Pga is the average meter pressure expressed on the gauge pressure scale;(c) Pa is(i) the mean atmospheric pressure at the meter location, expressed to at least four significant digits,(ii) the atmospheric pressure calculated for the meter location pursuant to subsection 37(1), expressed to at least four significant digits,(iii) the atmospheric pressure declared for the meter location pursuant to subsection 37(2), expressed to at least four significant digits, or(iv) the measured atmospheric pressure at the meter location, expressed to at least four significant digits; and(d) Ps is the standard pressure expressed on the absolute pressure scale.
Read the Electricity and Gas Inspection Regulations on the Justice Laws Website ↗
Made under Electricity and Gas Inspection Act, R.S.C. 1985, c. E-4.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.