Reduction in the Release of Volatile Organic Compounds (Storage and Loading of Volatile Petroleum Liquids) Regulations, SOR/2025-88

Section 64

Continuous vapour-tight enclosure

Cite as Reduction in the Release of Volatile Organic Compounds (Storage and Loading of Volatile Petroleum Liquids) Regulations, SOR/2025-88, s. 64 · current to July 24, 2025 · regulation last amended July 5, 2025

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) The operator must ensure that each internal floating roof is equipped with one or more rim seals that form a continuous vapour-tight enclosure around the entire perimeter of the floating roof, except where the rim seals are in contact with the tank wall, in which case the seal gaps must meet the requirements set out in subsection 65(2). (2) The following rim seal configurations are permitted: (a) a primary seal and one or more secondary seals of any kind; and (b) a primary seal that is either (i) a foam seal or liquid-filled seal that rests in continuous contact with the surface of the liquid, or (ii) a mechanical shoe seal, measuring at least 30 cm in height, composed of a curved metal sheet designed to be in continuous contact with the tank wall for a distance extending at least 10 cm above and 10 cm below the surface of the liquid.
Read the Reduction in the Release of Volatile Organic Compounds (Storage and Loading of Volatile Petroleum Liquids) Regulations on the Justice Laws Website ↗

Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.