Reduction in the Release of Volatile Organic Compounds (Storage and Loading of Volatile Petroleum Liquids) Regulations, SOR/2025-88

Section 23

Vapour pressure

Cite as Reduction in the Release of Volatile Organic Compounds (Storage and Loading of Volatile Petroleum Liquids) Regulations, SOR/2025-88, s. 23 · current to July 24, 2025 · regulation last amended July 5, 2025

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) The vapour pressure of a liquid must be determined in accordance with one of the following test methods: (a) the method ASTM D2879–23, entitled Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope; or (b) the method ASTM D6377–20, entitled Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method). (2) The test method referred to in paragraph (1)(a) may be used only to measure the vapour pressure of a liquid that consists of a single chemical species or of a single chemical species with an amount of impurities that is acceptable for general commercial trade. (3) A vapour-liquid ratio of 4:1 must be used to determine the vapour pressure of a liquid in accordance with the test method referred to in paragraph (1)(b). (4) The following temperatures must be used to determine the vapour pressure of a liquid in accordance with one of the test methods referred to in subsection (1): (a) if the liquid is at ambient temperature, 20°C; and (b) if the liquid is artificially heated or cooled, the highest monthly average operating temperature observed during the preceding 12 months.
Read the Reduction in the Release of Volatile Organic Compounds (Storage and Loading of Volatile Petroleum Liquids) Regulations on the Justice Laws Website ↗

Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.