Vessel Fire Safety Regulations, SOR/2017-14

Section 317

Cite as Vessel Fire Safety Regulations, SOR/2017-14, s. 317 · current to July 24, 2025 · regulation last amended November 23, 2022

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) This section applies in respect of the insulation, fire retardant coating and fire retardant resin required by this Part. (2) The insulation, fire retardant coating or fire retardant resin used on a deck or bulkhead must (a) cover the entire surface of the deck or bulkhead; (b) be carried past the penetration, intersection or terminal point of the deck or bulkhead for a distance of at least 380 mm; (c) be installed on the side on which the fire risk is higher, unless it is not possible to do so; and (d) if the insulation, coating or resin is vulnerable to damage, be protected to prevent any loss of its fire-resistant properties. (3) The insulation installed on a deck or bulkhead must be held in place by closely spaced studs and clips or by another method that will (a) hold the insulation in place for at least 60 minutes when it is exposed to fire; and (b) hold the insulation in place despite the vibration and motion of the vessel and the normal wear. (4) If insulation is installed on the stiffener side of a deck or bulkhead, at least 50% of the thickness of the insulation must be installed on top of the stiffener. (5) Fire retardant coating and fire retardant resin must be applied, and the surfaces to which they are to be applied must be prepared, in accordance with the specifications of its manufacturer.
Read the Vessel Fire Safety Regulations on the Justice Laws Website ↗

Made under Canada Shipping Act, 2001, S.C. 2001, c. 26.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.