Energy Efficiency Regulations, 2016, SOR/2016-311
Section 706
Information
Cite as Energy Efficiency Regulations, 2016, SOR/2016-311, s. 706 · current to April 28, 2026 · regulation last amended October 9, 2025
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) For the purpose of subsection 5(1) of the Act, the following information must be provided to the Minister in respect of a dry-type transformer:
(a) if applicable, information that indicates whether the transformer is in the 1.2 kV voltage class;
(b) its BIL rating;
(c) if applicable, information that indicates whether the transformer is a three-phase transformer that has multiple high-voltage windings and a voltage ratio other than 2:1;
(d) its kVA rating;
(e) its phase — namely, single-phase or three-phase;
(f) the tested efficiency, expressed as a percentage;
(g) the loss, expressed in watts, when it is under load and when it is not under load; and
(h) if it is manufactured on or after January 1, 2010, the impedance, expressed as a percentage.
(2) The information must be collected in accordance with one of the following standards:
(a) CSA C802.2-12, if the product was manufactured on or after January 1, 2005 and before January 1, 2016; or
(b) 10 C.F.R. Appendix A, if the product is manufactured on or after January 1, 2016.
Read the Energy Efficiency Regulations, 2016 on the Justice Laws Website ↗
Made under Energy Efficiency Act, S.C. 1992, c. 36.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.