Surface Coating Materials Regulations, SOR/2016-193

Section 4

Legibility and type

Cite as Surface Coating Materials Regulations, SOR/2016-193, s. 4 · current to July 24, 2025 · regulation last amended December 19, 2022

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) The warning required by section 3 must appear in (a) a permanent, clear and legible manner; (b) capital letters, except for the portion dealing with uses in the warning under subsection 3(1); (c) bold-face or medium-face sans serif type; and (d) type having the minimum height and size set out in columns 2 and 3 of the table to this subsection according to the display panel area set out in column 1.TABLEMinimum Height and Size of TypeColumn 1Column 2Column 3ItemDisplay panel areaMinimum height of type (mm)Minimum size of type (points)1100 cm2 or less1.542more than 100 cm2 but not more than 330 cm23.093more than 330 cm2 but not more than 650 cm26.0184more than 650 cm2 but not more than 2 600 cm29.0275more than 2 600 cm212.036 (2) In the calculation of the area of a display panel, any seam and any convex or concave surface at the top or bottom of the container are to be excluded. (3) In the case of a container that is curved in any way, other than a bag, the display panel area is 40% of the total area of the container, excluding the top and bottom. (4) For the purpose of paragraph (1)(d), the minimum height of type is determined by measuring an upper case letter or a lower case letter that has an ascender or descender, such as “b” or “p”.
Read the Surface Coating Materials Regulations on the Justice Laws Website ↗

Made under Canada Consumer Product Safety Act, S.C. 2010, c. 21.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.