Grade Crossings Regulations, SOR/2014-275
Section 93
Design plan — railway company
Cite as Grade Crossings Regulations, SOR/2014-275, s. 93 · current to July 24, 2025 · regulation last amended November 26, 2021
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) The design plan for a warning system at a grade crossing must be kept at the location of the grade crossing and must clearly indicate the following information:
(a) the configuration of the components of the warning system;
(b) the layout of the circuitry and signal equipment;
(c) the parameters for the operation of the components of the warning system;
(d) the type of light, including the lens deflection angles, if applicable, and the alignment coordinates of the light units; and
(e) the details of any interconnection with a traffic control device.
(2) The warning system must conform to the design plan and must be maintained in accordance with article 17.1 of the Grade Crossings Standards.
(3) When a component of the warning system is modified or installed, a design plan reflecting the modification or installation must be prepared and must be kept at the location of the grade crossing until it is replaced by a revised design plan.
Read the Grade Crossings Regulations on the Justice Laws Website ↗
Made under Railway Safety Act, R.S.C. 1985, c. 32 (4th Supp.).
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.