Chromium Electroplating, Chromium Anodizing and Reverse Etching Regulations, SOR/2009-162

Section 8

Cite as Chromium Electroplating, Chromium Anodizing and Reverse Etching Regulations, SOR/2009-162, s. 8 · current to July 24, 2025 · regulation last amended March 16, 2020

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

Every person that controls the release of hexavalent chromium compounds from a tank by using a tank cover must ensure that the cover is closed while chromium electroplating, chromium anodizing or reverse etching is taking place and that the cover has the following characteristics: (a) it completely encloses the open surface area of the tank; (b) it has a seal that joins the cover to the tank; (c) it has a membrane that is inset in the cover, that has a minimum surface area of 0.28 m2/kA of current and that has pore openings not larger than 1 µm; and (d) it has an evacuation device that is attached to the outside of the cover and that has a HEPA filter with pore openings not larger than 0.1 µm.
Read the Chromium Electroplating, Chromium Anodizing and Reverse Etching Regulations on the Justice Laws Website ↗

Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.